2. Figure 2 shows a roller rolling and slipping at the same time on a slippery surface. The center of the roller moves with a displacement z(t) and the roller rotates with angle 0(t). The roller has mass m, mass moment of inertia I, and radius r. In addition, a layer of fluid with viscous damping coefficient c is present to lubricate the roller. Moreover, the roller is pulled by a spring under a given (i.e., prescribed) displacement u(t), whereas the spring has spring constant k. Also, the roller is subjected to an applied torque M(t). Figure 3 shows the free-body diagram of the roller. Answer the following questions. (a) Apply F = ma to derive an equation of motion governing the translation z(t). (b) Apply M = Ia to derive an equation of motion governing the rotation 8(t). (c) Eliminate the variable (t) from the two equations of motion derived in parts (a) and (b). You should obtain a third-order differential equation in z(t). (d) Initially (i.e., at t = 0), the roller has no displacement but translates with a velocity up. The roller also has an initial spin rate wo. Derive the initial conditions for the third-order different equation governing z(t) in part (c). m, I -x(1) 8(1) M ww 1 u(t) Figure 2: A slipping roller with a pre- scribed displacement c(x-rė) mg k(u-x) Figure 3: Free-body diagram of the slipping roller

Solved: 2. Figure 2 shows a roller rolling and slipping at the same time on a

Home
questions and answers
2 figure 2 shows a roller rolling and slipping at the same time on a s

Question

2. Figure 2 shows a roller rolling and slipping at the same time on a slippery surface. The center of the roller moves with a displacement z(t) and the roller rotates with angle 0(t). The roller has mass m, mass moment of inertia I, and radius r. In addition, a layer of fluid with viscous damping coefficient c is prese