PUT YOUR TITLE HERE MECHANICS LABORATORY A. AUTHOR¹,2 Frankfurt Institute for Advanced Studies, J. W. Goethe University, Max-von-Laue-Str. 1, D-60438 Frankfurt am Main, Germany E-mail: authorA@mailserver.uni-frankfurt.de E-mail: authorB@mailserver.uni-frankfurt.de 2Horia Hulubei

National Institute for Nuclear Physics and Engineering, 30 Reactorului, P.O.Box MG-6, RO-077125 Bucharest-Magurele, Romania E-mail: autho @mailserver.nipne.ro Email: authorC@mai ver.nipne.ro Abstract. This is a Microsoft (MS) Word template to be used for preparing your laboratory report. The maximum number of words per abstract is 50 for reports and 200 for review articles. The text may be divided into sections numbered by Arabic figures, in the decimal system. The maximum number of keywords is 3 for regular articles and 6 for review articles. Key words: Superheavy nuclei, fusion reactions, cross-section. 1. INTRODUCTION This is an example of a template for your laboratory experiment in Mechanics. This template has an international character intended to follow by all the students undertaking this subject. You must submit the final paper both in word and pdf. All calculations in excel or notes must also be submitted for documentation purposes. Optionally, you may want to compress your submission into .ZIP archive format to ease electronic mail transfer and attach high resolution figures separately if you are not sure that graphic/figure quality (at least 300 DPI resolution) is maintained when embedded in MS Word document. MECHANICS (Laboratory) The author(s) shall hold full responsibility for the quality of the experiment. Any submitted lab report is carefully checked and scrutinized by your professor. Please avoid plagiarism as I will check it in Turnitin and other plagiarism applications. Anyone who will caught doing such act will receive automatically zero grade, irrespective if you just lift some phrases or copy the entire paragraph. You may contact me if you have further questions by means of W Edit with WPS Office PHY610 electronic mail: floyd.plando@pcu.edu.ph 1.1. INSTRUCTIONS FOR MANUSCRIPT PREPARATION You should use this document template to produce the MS WORD manuscript as a single file including the figures, tables and references at the right place. The special styles defined here must be used in writing the paper (Paper title; Authors; Affiliation; Abstract; Keywords/PACS; Heading 1,2,3; Normal; etc.). The only fonts allowed are Times New Roman and Symbol (for Greek characters in formulae and equations). Do not use headers or footnotes. N (E) × 10³ 20 Insert the figures at their appropriate position within the paper using Insert/Picture/From file... menu. Figures shall not be larger than an A4 page each. Figures reproduced from other publications need proof of copyright permission. Scanned illustrations with hand-writing or figures with embedded text in other language than English are not accepted. Figures/illustrations in color will appear as black-and-white/grayscale in print and will retain full-color quality in the electronic version published through the journal web site. For colored figures please, input "(Color online)." before the caption text. 25 15 10 5 A. Author * * * * * * * 0 4 8 * Fig. 1 1.2. FIGURES 12 16 20 24 28 Ex [MeV] - This is my first figure. 2 Gaussian Experiment WEdit with WPS Office 3 Article short title (maximum 40 characters) Figure captions and numbers shall not be incorporated in the figure. The figure captions should be preceded by 6pt vertical space. They shall be set next to the number of the figure, and centered, written using TIMES NEW ROMAN, 9pt. Between the number of the figure and its caption there should be a dash (-). Introduce a white line after the caption - 12 pt. These formatting details are already included in the Caption style of the current template. Measure units shall be mentioned in brackets, Sl units where required. As an example see the graphic above. 1.3. TABLES Tables shall be introduced at their appropriate place in the text. Landscape tables are not generally accepted so please, contact the editor prior to including them into your paper. Table numbers shall be written using TIMES NEW ROMAN, 9 pt, italic, CENTERED, without a final dot. Table titles center aligned, below the number of the table, using Times NEW ROMAN, 9 pt, CENTERED. Introduce a blank line after the end of the table - 12 pt. The Table Classic 1 style of this template was specifically modified to meet these requirements. Measurement units should be non-italicized. Table 1 The dynamic barriers, Eb, and logarithms of penetrabilities, log₁0 P, for the energy valley in synthesis of superheavy nuclei Eb [MeV] 9.76 9.80 10.46 12.09 12.70 Reaction 46Xe + 152Nd 140Te + 158Sm 140Xe + 158 Nd 138 Sn + 160 Gd 138Te + 160Sm PHY610 1.4. EQUATIONS log₁0 P -24.855 -27.327 -29.512 -29.405 -30.563 WEdit with WPS Office Equations may be written either with the Equation Editor or in the text mode using TIMES NEW ROMAN or/and SYMBOL fonts (see Equation style). Equations shall be preceded and followed by a blank line - 12 pt. Displayed equations shall be centered. Equations shall be numbered parentheses, flush right, using TIMES NEW ROMAN, 11 pt. They should also use two tabs: a central tab at 6.5 cm that centers the equation on page, and a right tab at 13 cm. PHY610 24 1 (1) i(a4/at) + ¤ (2²4/ax²) + λ 141² 4 = 0 (2) The nonlinear Schrödinger equation presented above is an example of properly formatted equation. Equation (1) was written in Equation Editor and then converted to image in order to offer better compatibility (mind the image resolution though). For equation (2) (in text mode) the following typesetting conventions were applied. ■ dt ■ A. Author + a ■ a²4 dx² + +1|4|³²4 = 0₁ Variables that use Latin letters are written in italic. Greek variables are not italicized. Trigonometric, hyperbolic, logarithmic, arc functions must be typed in non-italicized with their argument properly delimited from the rest of the formula. The total differential operator, symbolized by "d", must be written in non-italic, too. Short title shall be preceded by two blank lines - 12 pt. A short title of maximum 40 characters including blanks is suggested. It shall be written using TIMES NEW ROMAN, 9 pt, CENTERED. Short title shall be followed by a blank line 12 pt. 1.5. SHORT TITLE Alternatively, the short title could be provided by editing the reserved space on the odd page header of this document. There are styles defined by this template that specifically meet the requirements listed in the journal typesetting instructions. The authors are instructed to try to use these styles, accordingly. The correspondence between styles and different parts of the manuscript are listed below. For ■ paper title the style is called "Paper Title" authors typesetting - "Authors" affiliations - "Affiliation" abstract - "Abstract" 4 1.6. ABOUT USING STYLES key words and/or PACS number list - "Keywords/PACS" section title - "Heading 1" subsection title - "Heading 2" sub-subsection title - "Heading 3" paper text should be typeset using the "Normal" style WEdit with WPS Office 5 I Article short title (maximum 40 characters) tables "Table Classic 1" table numbers - "Table number" table captions - "Table caption" figure captions - "Caption, Figure Caption" list of references "1. Reference Numbers" for list style and "References" for reference text style The names between double quotes are the style names written as similar as possible to how they would appear in the "Styles and Formatting" listing. ■ 2. METHODOLOGY The name of the electronic file containing is recommended to start with the name of the first/corresponding author (and a specific word from the title of the paper in case of multiple submissions) followed by the letters "RJP". The name of the saved file should include in the final positions the version number of the WORD for WINDOWS editor used to produce the document (e.g. WD97, WD2000, WD2003, WD2k, WD2k3). 3. RESULT & DISCUSSION PHY610 The name of the electronic file containing is recommended to start with the name of the first/corresponding author (and a specific word from the title of the paper in case of multiple submissions) followed by the letters "RJP". The name of the saved file should include in the final positions the version number of the WORD for WINDOWS editor used to produce the document (e.g. WD97, WD2000, WD2003, WD2k, WD2k3). 4. CONCLUSION The name of the electronic file containing is recommended to start with the name of the first/corresponding author (and a specific word from the title of the paper in case of multiple submissions) followed by the letters "RJP". The name of the saved file should include in the final positions the version number of the WORD for WINDOWS editor used to WEdit with WPS Office/nDELIVERABLES: Need to do the whole lab. Need photos of the experiment to be attached on the lab reports. Kindly review the template, so that you know how much work should be done. COMPLETE THE INSTRUCTIONS, GIVEN ON THE TEMPLATE FILE. TOPIC SHOULD BE RELATED TO THERMODYNAMICS, CAN PICK ANY THERMODYNAMICS TOPIC. NO NEED TO USE ANY SOFTWARE.