- Home
- Chemistry Homework Help
- Applied Chemistry Homework Help
Applied Chemistry Homework Help - TutorBin
Submitting quality work on time does not get any easier than this. Choose TutorBin and avail top rated homework help today to maintain a high GPA.
Trusted by 1.1 M+ Happy Students
Applied Chemistry Homework Help Is Your Way To Academic Success!
Organic chemistry is a complex field that studies carbon-based molecules' characteristics, structures, and reactions. It is essential in health, biotechnology, genetics, and consumer goods since organic chemicals are the building blocks of life and many modern materials. Students often find it challenging because it is a complicated science with advanced concepts, including molecular structure and chemical processes. Therefore, they often enlist the assistance of experts to do their organic chemistry homework. And what better site than TutorBin to find organic chemistry experts?
Our instructors at TutorBin have the knowledge you need to ace your organic chemistry homework. They'll assist you in grasping complex concepts so you can succeed in your coursework. You will get one-on-one tuition where you will receive an in-depth explanation of complex topics in organic chemistry. Besides, they also offer written solutions while offering organic chemistry homework help. It would be apt to say that our tutors satisfactorily handle the "Do my organic chemistry homework" request.
TutorBin: No.1 Online Organic Chemistry Homework Help in the USA
| Topics | Benefits |
|---|---|
| Protein synthesis | Top-notch quality by eminent tutors |
| Hydrocarbons | 0% plagiarism |
| Alkanes | On-time delivery |
| Isomers | 100% accuracy |
| Monomers and polymers | Free revisions |
| Polymerization and peptide bonds | Pocket-friendly prices |
Why Do Students Need Help With Organic Chemistry homework?
The following pointers explain why students regularly seek organic chemistry homework help.
Unclear Concepts
Crafting an organic chemistry homework requires a thorough comprehension of the fundamentals. Organic chemistry differs significantly from other courses in fundamental science. It primarily depends on symbols. It presents conceptual difficulties with many complicated reactions. Not all pupils are conversant with the concepts of organic chemistry. Students seek professional help to fulfill their "Do my organic chemistry homework solutions" requests.
Approaching Deadline
Other subjects outside organic chemistry projects & reports demand students' attention. So, if the due day for turning in your homework is approaching, you start worrying. But you can ask for help with your organic chemistry homework if you don't have enough time to finish it on your own.
Time Management
Time management is a challenging aspect for students. Students undergo immense pressure while maintaining a balance between learning and performing well in academics. Therefore, to save time and effort, students outsource their work.
To fetch good marks
An essential part of a student's overall grade is their homework. As a result, they must be completed precisely and on time to earn higher scores. Delivering well-written organic chemistry homework help students get the best grades. And what better place than homework help services to get perfect homework solutions on time?
Our Organic Chemistry Tutors Assist You With These Topics!
Our tutors are qualified to assist you with organic chemistry homework. In addition to giving textual examples and explanations, they illustrate how to solve complex problems. You can get assistance from our tutors with any element of organic chemistry. Below is a list of some of the subjects our organic chemistry tutors cover:
Ask TutorBin, “Do My Organic Chemistry Homework” To Enjoy These Perks!
At TutorBin, we have a pool of the best organic chemistry homework experts to help you when needed. You can engage them if you find it challenging to apprehend this subject. Additionally, our organic chemistry homework helpers are always available if you need assistance with challenging homework.
Reliable and intelligent homework experts:
Our organic chemistry homework helpers are seasoned tutors in this field and have years of experience in tutoring students. They will flawlessly complete your challenging numeric and reactions-based homework with their expertise. You need to request "Do my organic chemistry homework solutions," and they will take care of the rest.
Full customer satisfaction:
Our online platform provides premium, guaranteed advantages for organic chemistry homework help. The expert team is committed to offering the best service possible. Additionally, we keep a full guarantee of client satisfaction by providing dependable service to thousands of clients throughout the world. If a customer is unsatisfied with the solutions, we tweak them at no extra cost.
Cost-effective and convenient delivery:
Our Organic Chemistry homework assistance is incredibly versatile in offering help at a very reasonable price and without additional fees. Service consistency is essential to us, and this is also our top priority. Before the deadlines, we'll provide answers to your organic chemistry homework. It will give you ample time to review them and ask us to make any necessary changes.
Extraordinary and customized assistance:
So far, we have offered dependable homework assistance for organic chemistry students worldwide. Our organic chemistry tutors have constantly provided personalized service to help students better understand the concepts. As a result, they will help you get top grades and achieve academic excellence.
Error-free and plagiarism-free tasks:
Our organic chemistry homework experts are capable of giving you the highest quality solutions, free of errors or plagiarism.
Get Organic Chemistry Homework Solutions From TutorBin Now!
Seeking assistance from TutorBin will provide you access to top organic chemistry tutors. Contrary to many other online tutoring services, we only work with specialists with years of experience and a solid educational background. Our organic chemistry teachers hold masters and doctoral degrees from reputed universities. They have knowledge and expertise in organic chemistry that they utilize to explain the concepts to you. You get access to our organic chemistry homework help around the clock. You can plan sessions at times convenient for you and receive assistance on demand. Every student can anticipate a prompt answer when you make your "Do my organic chemistry homework" request.
You'll get your organic chemistry homework solutions at a competitive price with TutorBin. There are no minimum payments or recurring charges; you only pay for the services you want to use. We consistently receive excellent reviews for student satisfaction. You can rely on us to provide efficient, dependable assistance with your organic chemistry homework solutions.
Why wait then? Request homework assistance with organic chemistry immediately. Cheers!
FAQs Searched By Students!
How much does TutorBin charge for organic chemistry homework help?
Our fees for organic chemistry homework help depend on several factors. These are;
Where can I get the organic chemistry homework solutions?
If you need organic chemistry homework solutions, don't hesitate to contact homework help services for assistance. But before you hire someone to help you with organic chemistry homework, consider the following aspects:
With the help of TutorBin, you may find accurate answers to your organic chemistry homework and simplify your life.
Can I get plagiarism-free help with organic chemistry homework?
When assisting you with organic chemistry homework, our tutors take the following precautions to prevent plagiarism:
How do I get homework help from organic chemistry experts at TutorBin?
You can follow these steps to get assistance from TutorBin's organic chemistry experts:
Why should I pay TutorBin to do my organic chemistry homework solutions?
TutorBin is a valuable site for finding organic chemistry homework solutions because of its many features
Does TutorBin provide organic chemistry tutoring for free?
We have highly educated and experienced organic chemistry experts. As a result, we charge for organic chemistry tutoring. We do not provide the free organic chemistry homework help as we compensate them for their time and efforts. However, our reasonable prices will benefit all the students.
How long will it take to get the organic chemistry solutions?
We encourage you to establish a deadline, and we will make sure that you receive organic chemistry solutions on time. However, the amount of time needed to deliver organic chemistry answers will depend on the difficulty and the deadline.
Recently Asked Applied Chemistry Questions
Expert help when you need it- Q1:Add or subtract the following measurements. Be sure each answer you enter contains the correct number of significant digits. 18.877 g 1.40 g 6.92 g 1.3 g 18.770 g + 0.77 g = = = g g 0 X SSee Answer
- Q2:1) a) A bare Si wafer is oxidized in dry O₂ at 1000 °C. The desired final thickness is 40 nm. i) Find the time required to perform the oxidation, ignoring rapid growth. ii) Find the time required to perform the oxidation, taking rapid growth into account. Do not use oxide growth curves. b) A <100> silicon wafer is oxidised using the following sequence i) 40 mins @ 1000°C in dry O₂. ii) 60 mins @ 1000°C in steam. iii) Etch 0.3 microns of oxide. iv) 20 mins @ 1100°C in dry O₂. Use growth curves to calculate the oxide thickness after each step. Nitride- Silicon Wafer Oxidation: Pad Oxide Oxide Nitride removal: "Bird's beak" [10 1/3 marks] [10 marks] Figure 1. LOCOS process c) The diagram above, Figure 1, shows a fully recessed LOCOS (Local Oxidation of Silicon) process. Explain, with reference to the diagram, how the process is used to produce areas of oxide on a wafer without a subsequent lithography and etch step. [5 marks] d) Discuss five of the features of SiO₂ which account for its widespread use in microelectronics. [5 marks]/nSee Answer
- Q3:2) a) A phosphorous doped n-type silicon wafer of 1 92-cm resistivity is subjected to a boron diffusion at a temperature of 1150 °C. A constant surface concentration of 2 x 10¹⁹ cm³ is maintained throughout the diffusion. i) Calculate the background concentration in the wafer. ii) How long should the diffusion be carried out for to obtain a junction depth of 4 microns. iii) Calculate the charge, Q. [15 1/3 marks] b) Describe with the aid of a diagram, a liquid source diffusion system. [5 marks] c) State Henry's Law. Explain why predeposition is performed at the solid solubility limit in industrial practice. [5 marks] excitation: primary ion beam: ot, Art, O, Cst ooooooooooooo Figure 2. SIMS Schematic Diagram analytical signal secondary ions: X*, X, X-Y*, X-Y- not used: neutrals, excited atom d) Figure 2, above, shows a schematic diagram illustrating Secondary Ion Mass Spectroscopy (SIMS) Briefly describe the technique. Why would SIMS be a poor method to use to profile dopant concentrations in a multi-quantum-well laser consisting of several ultra-thin layers of different materials? How is this measurement attempted in practice? [5 marks] e) Rapid Thermal Processors use several methods to compensate for higher radiant heat losses at the periphery of the wafer. Briefly discuss one of these methods. [3 marks]See Answer
- Q4:3) a) Describe, with the aid of suitable diagrams where necessary, the principal steps in a typical lithography process flow. Your answer should include a discussion of i) Wafer surface preparation ii) Resist application iii) Soft bake iv) Alignment and Exposure v) Development [15 1/3 marks] b) A proximity X ray mask is made up of tungsten absorbing patterns on a silicon nitride membrane. The minimum feature size is 0.1 microns. i) If the membrane heats up by 9°C during the exposure and the field is square with 3 cm sides, how much will the field be distorted due to thermal expansion of the membrane? Express your answer as a % increase in the length of a side. ii) If the maximum allowable distortion is 1/3 the minimum feature size, what is the maximum allowable temperature rise on the mask. Take the Thermal Coefficient of expansion for silicon nitride to be 2.7 X 10-6 (°C-¹). [10 marks] c) An optical lithographic system has an exposure power of 0.3 mW/cm². The required exposure energy for a positive resist is 150 mJ/cm² while the exposure energy needed for a negative resist is 12 mJ/cm². i) Neglecting load and unload times, calculate the wafer throughput for both the positive and negative resists. ii) Comment on your results, explaining why positive resist is preferred in general. [8 marks]See Answer
- Q5:4) a) The Deal Grove model for deposition determines the growth rate of a CVD film as kạng Cry kg + hg N v is the growth rate ks is the surface reaction rate v= hg is the mass transfer coefficient CT is the total concentration of the gas in the reactor N is the number of atoms per unit volume in the film Y is the mole fraction of the reactant Y= _CG CT i) Simplify the expression for growth rate assuming ks << hg. Is this the surface reaction-controlled case or the mass transfer controlled case? Why? ii) Simplify the expression for growth rate assuming kç » hg. Is this the surface reaction-controlled case or the mass transfer controlled case? Why? iii) Is the growth rate of a film dependent on temperature if it is mass transfer controlled? Why? iv) Is the growth rate of a film dependent on temperature if it is surface reaction controlled? Why? v) Is the growth rate of a film dependent on reactor geometry if it is mass transfer controlled? Why? vi) Is the growth rate of a film dependent on reactor geometry if it is surface reaction controlled? Why? [18 1/3 marks]/n[18 1/3 marks] b) Discuss concisely the differences between Chemical Vapour Deposition (CVD) and Molecular Beam Epitaxy (MBE). An engineer has designed a GaAs/InGaAs quantum well laser. She has specified that control of the layer thicknesses within the device is required to within a single molecular layer. Would CVD or MBE be an appropriate technology to realise her device? [10 marks] 2.0 1.5 2. 1.0 0.0 -0.5 -1.00 1.00 2.0 1.5 1.0 2. Jedn 0.0 -0.5 -1.00 1.00 Page 8 of 17 2.0 1.5 1.0 0.0 -0.5 0.0 0.0 microns microns (a.) (b.) (c.) Figure 3. Simulation of trench filling with LPCVD oxide with different sticking coefficients. -1.00 0.0 microns 1.00/nc) The sequence of diagrams in Figure 3 shows the results of a SPEEDIE simulation of trench filling using Low Pressure Chemical Vapour Deposition (LPCVD) of SiO₂ in a narrow trench. The same isotropic arrival angle distribution (n=1) is used for all 3 simulations but the sticking coefficient, Sc,is varied. i) Identify the plot with the highest value of the sticking coefficient. ii) Identify the plot with the lowest value of the sticking coefficient. iii) Figure 3 (b) indicates that void formation may be a problem with this process. Why are voids in trenches problematic? [5 marks]See Answer
- Q6:= 0+1866XLO 1) a) A bare Si wafer is oxidized in dry O2 at 1100 °C. The desired final thickness is 50 nm. J i) Find the time required to perform the oxidation, ignoring rapid growth. ii) Find the time required to perform the oxidation, taking rapid growth into account. tox Use Deal-Grove equations - do NOT use oxide growth curves. b) A <111> silicon wafer is oxidised using the following sequence i) 60 mins @ 1000°C in dry O₂. ATB 0,065 [10 1/3 marks] ii) 60 mins @ 1000°C in steam. 0.125 iii) Locally etch 0.1 microns of oxide to create a trench. iv) 30 mins @ 1100°C in dry O2. 0.009 Use growth curves to calculate the oxide thickness after each step. [10 marks c) It is possible to determine the thickness of oxide on oxidised wafers by visual inspection. Describe the method and discuss TWO disadvantages of this technique. [5 marks] d) Discuss FIVE of the features of SiO₂ which account for its widespread use in microelectronics. Breack down $h field [5 marks e) Dry oxidation is much slower than wet oxidation. Discuss briefly any advantages to using dry oxides instead of wet oxides. [3 mark -Excellent stable Passivation Excellent and stable Eelectricat Properties If the wet wild is s is day,See Answer
- Q7:3) a) Discuss, in detail, the following light sources used in lithography. i) Mercury lamps (Ultra Violet UV) ii) Excimer lasers (Deep Ultra Violet DUV) iii) Laser pulsed plasma (Extreme Ultra Violet EUV) Make sure you consider the mechanism by which the radiation is produced, the technology used to construct the light source and the advantages and disadvantages each technology. Include labelled diagrams where appropriate. [15 1/3 marks] b) An X ray mask is made up of tungsten absorbing patterns on a silicon nitride membrane. The minimum feature size is 0.13 microns. i) If the membrane heats up by 10° C during the exposure and the field is square w 4 cm sides, how much will the field be distorted due to thermal expansion? Express your answer as an increase in side length in microns. Take the Therma Coefficient of expansion for silicon nitride to be 2.7 X 10-6 (°C-¹). ii) If the maximum allowable distortion is 1/4 the minimum feature size, what is t maximum allowable temperature rise on the mask. Comment on your result. [10 m c) A lithographic scanner has an exposure power of 0.25 mW/cm². The required exposure energy for a positive resist is 160 mJ/cm² while the exposure energy ne for a negative resist is 11 mJ/cm². i) Neglecting load and unload times, calculate the wafer throughput, in wafers hour, for both the positive and negative resists. ii) Comment on your results, explaining why positive resist is preferred in gene [8 mSee Answer
- Q8:3. The reaction shown below occurs by a general acid-catalyzed pathway. Please propose a reasonable mechanism for this reaction. Me OH H-B (cat.)See Answer
- Q9:(A) Lil Time Rate (A)→ What reaction order is this? Based on your assessment, if the initial concentration of nitrate in the environment is 1.8 mol/L NO3, what will the concentration be after 21 days if the rate constant of the reaction is k = 0.5? Select the appropriate units for k based on what reaction order you believe this is: Zero (M/hr), First (1/hr) or Second (1/M.hr). Assume that there are no other inputs or outputs. (3 marks) c) How many MORE days will it take to reach a concentration that is below the Canadian drinking water guidelines of 10 mg/L of NO3-N? (2 marks) **Molar mass N (14.0067 g/mol) and O (15.999 g/mol).See Answer
- Q10:What is the ionic strength (I) of a solution when 1 mole of norsethite [BaMg(CO3)2] is completely dissolved in 2 liters of pure water? Show your work for full marks. (3 marks)See Answer
- Q11:1. The SA Water desalination plant in Lonsdale was officially opened in 2013 to assist with fresh water supply during the 2000s drought. As we are no longer drought- stricken in South Australia, the plant currently operates at 10% of its 300 megalitre/day capacity. The sea water feeding the desalination plant along the coast of Lonsdale has a salinity value of 35 grams/litre. The brine (salty water) output from desalination plant is has a salinity of 75 grams/litre. The density of sea water can be assumed to be 1020kg/m3 and the density of the brine as 1050kg/m3. a. Determine the mass flow rates of the brine and pure water streams leaving the desalination plant in kg/hr. [6.125 * 105 kg/hr] b. If the salinity meter used to determine the salt content in the water is accurate to the nearest 1g/L and has a precision level of ±5%, determine the uncertainty in the flow rate of the brine. [Assuming independent ±4.4*104 kg/hr]See Answer
- Q12:2. You have been tasked with preparing one litre of 1M, 2M and 3M solutions of sodium hydroxide. To complete the task, you have access to an analytical balance with a maximum capacity of 60g that is accurate to the nearest 0.01g, 3 one litre volumetric flasks, accurate to ±0.12mL. a. Determine the uncertainty in the concentration of each of the solutions using the balance and the one litre flasks. [8C₁ = ±1.73 10-4M, 8C₂ = ±2.98* 10-¹M, SC3= 4.01 10-4M] OR [8C₁ = +1.73 10-4M, 8C₂ = ±3.47*10-4M, 8C3 = 4.38 10-4M b. You accidentally break the flask for the 3M solution mid-way through preparing the solution. Instead, you now need to use four 250mL flasks accurate to ±0.08mL. Determine the total uncertainty in the concentration of 1L of 3M solution prepared this way. [SC3b = 4.33 * 10-³M OR 8C3b = 2.165 10-³M]See Answer
- Q13:3. Consider a hot automotive engine, which can be approximated as a 0.6 m high, 0.3 m wide, and 0.9 m long rectangular block. The bottom surface of the block is at a temperature of 90°C and has an emissivity of 0.9. The ambient air is at 23°C, and the road surface is at 28°C. The fluid properties of air are determined at the film temperature and can be found in the tables at the end of the tutorial. a. Determine the rate of heat transfer from the bottom surface of the engine block by convection and radiation as the car travels at a velocity of 60 km/h. [916W] b. If the temperatures were measured with a thermometer accurate to the nearest 1°C, what is the uncertainty in the resultant heat transfer rate? (You may ignore the uncertainties when calculating your fluid properties). [+10W] c. If the speedometer in the car is accurate to the nearest 2km/h, what is the uncertainty in the result? [+11W] [Uncertainties assumed as independent in all cases]See Answer
- Q14:4. Given the following experimental observations (errors determined as standard deviations): h₁ = 15 + 1mm (manometer reading) h₂ = 9±1mm (manometer reading) P₁ = 18.6 ± 0.1 psia Q=0.308 ± 0.06 ft³. (min)-¹ V = 1 + 0.05 gal m = 8.2 ± 0.05 lbm Calculate the following derived variables and their best-estimate uncertainties. Present the results in the form of x = x, ± 8x. a. Pressure drop reading from the manometer. AP(mmHg) = h₁ - h₂ [6±1.4mmHg] b. Pressure drop conversion from mmHg to psia. [0.12±0.027psi] c. Pressure ratio: [1.006±0.008794] d. Specific Gravity: SG = Psample Pwater (for liquids) [0.98+0.05] e. Valve sizing coefficient: C₂ = Q * SG So for Qin ΔΡ gal minute and AP in psi [6.7+1.5]See Answer
- Q15:Question 9 Not yet answered Points out of 1 P Flag question The product of the nucleophilic substitution reaction below is *SCH₂CH₂ Select one: O a. O b. O C. CH₂CH₂CH₂SCH₂CH₂ S-CH₂-CH; CH₂-CH-CH₂ Br ! CH₂CCH, S-CH₂-CH; O d. CH₂-CH₂-CH₂-CH₂-SH Br CH;CHCH; Previous page ob Quix #4 Next pageSee Answer
- Q16:Points out of 1 P Flag question Which of these compounds is a properly named 2° alcohol? Select one: a. 1,3-Propandiol O b. 2-Methyl-3-methyl-3-pentanol O c. 1-Propanol H H- H HH H H H m- -C- O d. 3-Hexanol m H B -- 8 -C- 8 D H -O HH -- Q сSee Answer
- Q17:Question 15 Not yet answered Points out of 1 P Flag question What is the product of the nucleophilic substitution reaction below? CH₂ OCH; CH,CH₂CHCH₂CH₂Br Select one: O a. O b. O C. O d. CH₂CH₂CHCH₂CH₂OCH; CH,CH,CHCH₂CH₂CH₂ CH₂ CH₂CH₂CHCH₂CH₂OH CH; CH₂CH₂CCH₂CH₂Br OCH, Previous page Next pageSee Answer
- Q18:Question 46 Not yet answered Points out of 1 P Flag question Which of the following is a carboxylic acid sugar? Select one: a. b. O d. OH COCH -OK CH₂OH a 2 сSee Answer
- Q19:Question 32 Not yet answered Points out of 1 PFlag question What is the product of the following reaction? H HO H HO- H -H OH -H -OH CH₂OH Select one: O a. H H H 32 A HO + -H -OH -H H -OH CH₂OH Benedict's Solution aSee Answer
- Q20:Question 19 Not yet answered Points out of 1 P Flag question What is the major organic product of the following reaction? || CH₂CH₂C-H + H₂ Select one: a. CH₂CH=CH₂ O b. CH₂CH₂CH₂OH OC. CH3CH, CH3 d. CH3CH₂COOH Previous page I Lab Quiz #4 Jump to... Pr Next pageSee Answer
Popular Subjects for Applied Chemistry
You can get the best rated step-by-step problem explanations from 65000+ expert tutors by ordering TutorBin Applied Chemistry homework help.Get Instant Applied Chemistry From TutorBin App Now!
Get personalized homework help in your pocket! Enjoy your $20 reward upon registration!
Testimonials
TutorBin has got more than 3k positive ratings from our users around the world. Some of the students and teachers were greatly helped by TutorBin ."They provide excellent assistance. What I loved the most about them is their homework help. They are available around the clock and work until you derive complete satisfaction. If you decide to use their service, expect a positive disconfirmation of expectations."
Willow "After using their service, I decided to return back to them whenever I need their assistance. They will never disappoint you and craft the perfect homework for you after carrying out extensive research. It will surely amp up your performance and you will soon outperform your peers."
Olivia "Ever since I started using this service, my life became easy. Now I have plenty of time to immerse myself in more important tasks viz., preparing for exams. TutorBin went above and beyond my expectations. They provide excellent quality tasks within deadlines. My grades improved exponentially after seeking their assistance."
Gloria "They are amazing. I sought their help with my art assignment and the answers they provided were unique and devoid of plagiarism. They really helped me get into the good books of my professor. I would highly recommend their service."
Michael "The service they provide is great. Their answers are unique and expert professionals with a minimum of 5 years of experience work on the assignments. Expect the answers to be of the highest quality and get ready to see your grades soar."
Richard "They provide excellent assistance. What I loved the most about them is their homework help. They are available around the clock and work until you derive complete satisfaction. If you decide to use their service, expect a positive disconfirmation of expectations."
Willow "After using their service, I decided to return back to them whenever I need their assistance. They will never disappoint you and craft the perfect homework for you after carrying out extensive research. It will surely amp up your performance and you will soon outperform your peers."
Olivia TutorBin helping students around the globe
TutorBin believes that distance should never be a barrier to learning. Over 500000+ orders and 100000+ happy customers explain TutorBin has become the name that keeps learning fun in the UK, USA, Canada, Australia, Singapore, and UAE.
