hydrostatics and stability homework help
Boost your journey with 24/7 access to skilled experts, offering unmatched hydrostatics and stability homework help
Trusted by 1.1 M+ Happy Students
Recently Asked hydrostatics and stability Questions
Expert help when you need it- Q1:1) What is the height of the centre of buoyancy above keel in Fig 2.3 in Chapter 2 at the draft of 13.10m?See Answer
- Q2:2) What is the stability condition for a KG=20ft. KB=5ft and BM 14ft?See Answer
- Q3:3) On which side of the centreline is the position of TCG in fig 2.2 if the value of TCG =-1.5m?See Answer
- Q4:4) The displacement of a vessel is 6500st. GM=4.5ft. Weights are shifted to cause G to rise 1.3ft. The heel is 5º. Calculate the loss of righting moment.See Answer
- Q5:5) 3m 2m 도움 ?kg 8kg 2m 8kg 2m 7.5kgSee Answer
- Q6:9) Find the distance LCG 4.50m 6.25m LCG=?m 12.05m 40t 200t 3.20m 15t 60tSee Answer
- Q7:4) 6lbs 12lbs 4ft ?ft 8ft 18lbsSee Answer
- Q8:Q4 A vessel is initially floating at a displacement of 15550t with a list of 2.0 to port. KM-9.85 m (constant) Initial KG (fluid) - 9.00m There is a double bottom tank subdivided into two rectangular tanks of equal dimensions, which contain ballast and are both slack. Each tank has a breadth of 10.0m. Calculate the weight of ballast to transfer, and in which direction, between the two double bottom tanks to bring the vessel to the upright (PC4.7) condition.See Answer
- Q9: 3/2/22, 11:23 AM FSE 360 Fire Prot Hydr & Water Supply, Spring 22, 20730 Take t Information Friction Loss in Piping Multiple Not allowed. This test can only be taken once. Attempts * Question Completion Status: 10pt <lılı Description Instructions Using the friction loss and equivalent pipe length tables that can be found in NFPA and/or FM Global documentation, complete the following questions. Your answers are saved automatically. A V 18 QUESTION 1 5 points You have a water tank with a gauge at the bottom. The gauge reads 38psi. How high is the water tank filled above the gauge? For the toolbar, press ALT+F10 (PC) or ALT+FN+F10 (Mac). BIUS Paragraph Arial P I +] 88 |||| 3 ABC Ix XQS Q5 EE X² X₂ Assignments ✓ ΠΠΩ +8 旺 SE EXE ΨΩΘ. ot... ते 图 <> >¶¶< Friction Loss in Piping X {}} Save Answer O WORDS POWERED BY TINY Click Save and Submit to save and submit. Click Save All Answers to save all answers. ? Save All Answ https://eku.blackboard.com/webapps/assessment/take/launch.jsp?course_assessment_id=_456688_1&course_id=_307066_1&content_id=_17511461_1&step=null 1/3 3/2/22, 11:23 AM BIUS 10pt 8 P 10pt <ll < | +] 8 A P 3 E < ABC = = = = +18 Ix ABC Paragraph * Question Completion Status: How many equivalent feet of pipe is included in the following arrangement of pipe and appliances? Assume a c factor of 120 for all piping. Ix J 320 feet of 8" steel pipe, an 8" gate valve, an 8 inch double check backflow preventer, an 8" gate valve, 185 feet of 6" pipe, a 6" long turn elbow, and 2 feet of 6" pipe For the toolbar, press ALT+F10 (PC) or ALT+FN+F10 (Mac). BIUS Paragraph Arial ¶ "" AX Xa Q E E X² X₂ P "ΩΘΙ E Friction Loss in Piping - FSE 360 Fire Prot... ... AÐ Arial 國田用 XQ ¶" Daragraph >¶¶< X * DE <> † {} O WORDS POWERED BY TINY Q5 X² X₂ ¶ ¶< @ "ΩΘΙ Arial X QUESTION 4 How much friction loss in in the above described run of pipe if it is flowing at 1,375gpm? For the toolbar, press ALT+F10 (PC) or ALT+FN+F10 (Mac). RT U <> † {} O WORDS POWERED BY TINY 5 points Save Answer Click Save and Submit to save and submit. Click Save All Answers to save all answers. Save All Answ https://eku.blackboard.com/webapps/assessment/take/launch.jsp?course_assessment_id=_456688_1&course_id=_307066_1&content_id=_17511461_1&step=null 2/3 3/2/22, 11:23 AM | 88 [+ P QUESTION 5 * Question Completion Status: B IU S 10pt A V ABC === | 8 P +1 8 5 points Save Answer Your combined sprinkler and hose stream demand requirement at the base of the riser is 647gpm at 43 psi. You have a water test that shows you have 58 psi available at 647gpm at an effective point outside the building. The effective point is 9 feet higher than the base of the riser. You have also calculated a friction loss of 3 psi at this flow in the underground piping back to the effective point from the riser. Is the water supply sufficient for this sprinkler system? If so, what is your safety margin in psi. If not, what is your pressure deficiency in psi? ABC Take Test: Friction Loss in Piping - FSE 360 Fire Prot.... Ix ¶ AÐ Paragraph "Ω GE П 因出用 Arial XQ S X² X₂ O WORDS POWERED BY TINY " x ΠΩΘΙ ‹› † {} X₂ >1 ¶< * * ! A X ‹› † {} 0 WORDS POWERED BY TINY Click Save and Submit to save and submit. Click Save All Answers to save all answers. Save All Answ https://eku.blackboard.com/webapps/assessment/take/launch.jsp?course_assessment_id=_456688_1&course_id=_307066_1&content_id=_17511461_1&step=null 3/3See Answer
- Q10: An irrigation pond is built from an impermeable concrete cylinder installed in a hole with deep(saturated) clay soils lying at the bottom the pond. The clay has a hydraulic conductivity of 1x10-3 m/day. During summer, evaporation leads to a loss of 5 mm/day from the pond.The pond contains 50 cm depth of water at the beginning of summer. Assume that the pressure in the pore water below the pond is zero everywhere, and that it is the flux of water in the soil (regardless of the stored depth of water in the pond) that drives the drainage from the pond. A. Write an expression for the amount of time (At ) it takes for the pond to dry out, in terms of the change in storage (AS) and the vertical fluxes out of the pond control volume (E and 9₂), which you should define as fluxes leaving the control volume (i.e., both fluxes will be positive, meaning E points in the +z direction and q₂ in the -z direction). B. How long does it take for the pond to dryout? C. The fact that water was flowing vertically in(A) and (B) means that we do not have hydrostatic pressure within the soil. Assuming uniformity in the x and y directions and the z-axis oriented upward, in what range must the See Answer
- Q11: An earthen dam is constructed on an impermeable bedrock layer. It is 85 m across,with conductivity and water levels above and below the dam shown in the figure and the current level of the water table shown in the black line. Assume that porosity is homogeneous, and that saturated hydraulic conductivity is homogeneous and isotropic. A. Compute the volume of water (per 100 mwide strip of the dam, in m³/day) that passesinto the dam from the reservoir. Compute thisflow rate through a surface area that extendsvertically down from the edge of the surface ofwater in the reservoir. Do the same for the flowrate into the tailwaters. B. The water table within the dam is not at steady state, as indicated by your answers in part (A). Sketch a control volume and derive a governing equation (which will be a partial differential equation) for unsteady flow through the reservoir. Although the water table is not completely horizontal, assume all the flow lines are horizontal. Your final answer should be a partial differential equation in terms of the height of the water table in the dam, h(x,t).Remember that you can also simplify your answer using the chain rule for multiplication from calculus to get your answer in terms ofh²2. C. Assume that the water table has reached steady state (there are no changes with respect to time). Solve the partial differential equation for h(x), including calculating values for the integration constants using the two constant-head boundary conditions on both sides of the reservoir for the differential equation. Your final answer should be a function h(x), with x as the only remaining variable.See Answer
- Q12: The goal of this question is to use Darcy's Law and the concept of a control volume to write a water balance for flow in porous media in three dimensions. The multiple parts of the question are intended to help you through the steps of this derivation. The control volume is a cube with dimensionsAx x Ay × Az [L³]. It contains a homogeneous and isotropic porous medium with porosity and saturated hydraulic conductivity Ksat [L/T]. The porous medium is saturated by fluid with a constant density p,although we won't need to assume saturation until part (F). Water is flowing through the control volume at steady state. The volumetric flux of water per unit area [L/T] can be denoted by q=qxi+qyj+qzk, where the bold type indicates a vector quantity, and i, j and k are the unit vectors in the x, y and z directions respectively. For a single direction, e.g. the x direction, the flux entering the control volume is qx (x), and the flux leaving the control volume is qx (x + Ax) A. Sketch the 3D control volume and the components of the volumetric water flux in each direction. Label all relevant dimensions and show a coordinate axis. B. Write down expressions (in units ofmass/time) for the mass flux entering the control volume in the x direction; the mass flux leaving the control volume in the x direction; the net mass flux in the x direction; and ■ the net mass fluxes in the y and zdirections. C. Write down the change of the mass stored in the control volume (in units of mass/time) interms of volumetric water content (do not assume saturation). D. Using the results from (B) and (C), write out the mass balance for the control volume accounting for mass fluxes in x, y, and z directions, in units of mass/time. E. Divide the answer to (D) by the density p and the volume Ax x Ay x Az. Apply the definition of a derivative to represent the rates of change in space and time in differential form. F. Apply the criteria that the porous media is saturated (VWC=0 = p). Given the definition of the control volume, this implies steady state(the amount of stored water is not changing over time). Using Darcy's Law for saturated flow, re-write your answer to part (E) in terms of the hydraulic gradient in the x, y and z directions and Ksat. Simplify the equation.See Answer
TutorBin Testimonials
I got my Hydrostatics And Stability homework done on time. My assignment is proofread and edited by professionals. Got zero plagiarism as experts developed my assignment from scratch. Feel relieved and super excited.
Joey DipI found TutorBin Hydrostatics And Stability homework help when I was struggling with complex concepts. Experts provided step-wise explanations and examples to help me understand concepts clearly.
Rick JordonTutorBin experts resolve your doubts without making you wait for long. Their experts are responsive & available 24/7 whenever you need Hydrostatics And Stability subject guidance.
Andrea JacobsI trust TutorBin for assisting me in completing Hydrostatics And Stability assignments with quality and 100% accuracy. Experts are polite, listen to my problems, and have extensive experience in their domain.
Lilian KingI got my Hydrostatics And Stability homework done on time. My assignment is proofread and edited by professionals. Got zero plagiarism as experts developed my assignment from scratch. Feel relieved and super excited.
Joey DipI found TutorBin Hydrostatics And Stability homework help when I was struggling with complex concepts. Experts provided step-wise explanations and examples to help me understand concepts clearly.
Rick JordonPopular Subjects for hydrostatics and stability
You can get the best rated step-by-step problem explanations from 65000+ expert tutors by ordering TutorBin hydrostatics and stability homework help.TutorBin helping students around the globe
TutorBin believes that distance should never be a barrier to learning. Over 500000+ orders and 100000+ happy customers explain TutorBin has become the name that keeps learning fun in the UK, USA, Canada, Australia, Singapore, and UAE.
