tutorbin

petroleum production technology homework help

Boost your journey with 24/7 access to skilled experts, offering unmatched petroleum production technology homework help

tutorbin

Trusted by 1.1 M+ Happy Students

Recently Asked petroleum production technology Questions

Expert help when you need it
  • Q1:Relative permeability measurements are made on three core samples. The measured data are summarized below: Core sample 1 h = 1 ft k = 100 mD Soc= 0.35 Swc= 0.25 Water Saturation Sw 0.20 0.25 0.30 0.40 0.50 0.60 0.65 0.72 *Value at critical saturation Core sample 2 h = 1 ft k=80 mD 0.850* 0.754 0.557 0.352 0.131 0.000 Soc= 0.28 Swc = 0.30 Core sample 1 Kro Krw Core sample 2 Kro Krw 0.000 0.018 0.800 0.092 0.593 0.198 0.393 0.327 0.202 0.400* 0.111 0.000 0.000 0.077 0.191 0.323 0.394 0.500* Core sample 3 h = 1 ft k=150 mD Soc= 0.35 Swc = 0.20 Core sample 3 Krw 0.000 0.008 0.027 0.088 0.176 0.286 0.350* Kro 1.000* 0.872 0.839 0.663 0.463 0.215 0.000 It is believed that a connate water saturation of 0.27 and critical oil saturation of 30% better describe the formation. Generate Oil and water relative permeability data using new critical saturation. Plot the averaging relative permeability data. Using data given, de-normalize the data to generate the required relative permeability data.See Answer
  • Q2:1. Discuss the two commercially most important properties of crude oils See Answer
  • Q3:2. What is the specific gravity of a 30° API gravity oil? (0.5 Marks) See Answer
  • Q4:3. What do you mean by Reid vapor pressure. How is performance of a spark ignition motor engine effected if the fuel's Reid vapor pressure is too high or too low ? See Answer
  • Q5:4.What is the elemental composition of most crude oils? See Answer
  • Q6:5. What has been the impact of Russia Ukraine conflict on the global oil market? See Answer
  • Q7:Solve the following BVP-ODE with the Finite-Difference, Shooting, and Successive Over- relaxation Methods. Use a step size of 0.01. You may use MATLAB or Excel/VBA to solve these BV-ODES. Remember to completely annotate your programs and turn in your complete programs and output. Also turn in a complete description of your algorithm that you used in the program, i.e., as shown in the notes and examples in class. Compare and contrast the use of all three BVPnumerical methods that were used to solve this problem. A chemical reactor with axial dispersion is governed by the following equations:See Answer
  • Q8: Explain what is the difference between Andesite and Diorite? (4 marks)See Answer
  • Q9: ) Explain the working of a rock cycle and how it plays an important role in petroleum geology?See Answer
  • Q10: 2.1. Based on the data in Table 2, determine the selectivity (separation factor). 2.2. Based on the data in Table 2, determine the distribution coefficient (K).See Answer
  • Q11: What is the main difference between extracting Oil Shales and Tar Sands?See Answer
  • Q12: d) While an unknown mineral was tested for its hardness, it was observed that mineral could be scratched by steel nail as well as glass plate. However, mineral was not scratched when copper penny was used. What is the hardness range of the mineral?See Answer
  • Q13: Explain the process of diagenesis, catagenesis and metagenesis in detail.See Answer
  • Q14: What differentiates Isopach maps from Isochore maps? (See Answer
  • Q15: A mixed hydrocarbon stream must be distilled in a continuous distillation column. The flow rate of the feed is 1000 kmol/h. The feed enters as a liquid at its boiling point. The feed mixture containing six components (CH4 = 0.032, C2H4 = 0.068, C2H6 = 0.17, C3H6= 0.30, C3H8 = 0. 32, n-C4H10 = 0.11) is to be separated by distillation. It is desired to recover 98.5% mole fraction of the light key in the distillate and 98% of the heavy keyin the bottom product. The average relative volatility (a) values are given in Table 1.The a can be assumed to remain constant with any temperature variation. 1.Determine the light key (LK) and heavy key (HK). 2.Use Underwood's method to determine the minimum reflux ratio (the 0 valuesto try are 1.1.1.17 and 1.2).(15) Use the Fenske equation to determine the minimum number of trays.See Answer
  • Q16: e) Explain different types of petroleum traps and their importance in trapping mechanism of oil.See Answer
  • Q17: a) Explain how Geological Time Scale describes the timing and relationships between events that have occurred throughout Earth's history? (4 Marks)See Answer
  • Q18: 1. A drillstring consists of 9,000 ft 5 in, 19.5 lbm/ft drillpipe, and1,000 ft of 8 in OD, 3in ID drill collars. What is the: (a) Volume of the drillpipe in bbl. (b) Volume of the drill collars in bbl (c) Number of pump cycles required to pump surface mud to the bit(duplex pump, 6 in liners, 2.5 in rods, 16 i strokes, pumping at 85 % volumetric efficiency). (d) Displacement of drillpipes in bbl/ ft (e) Displacement of drill collars in bbl/ft.See Answer
  • Q19: ) What differentiates cleavage from fracture of a mineral? (1.5 marks)See Answer
  • Q20: O Explain the process of diagenesis, catagenesis and metagenesis in detail.See Answer

TutorBin Testimonials

I got my Petroleum Production Technology homework done on time. My assignment is proofread and edited by professionals. Got zero plagiarism as experts developed my assignment from scratch. Feel relieved and super excited.

Joey Dip

I found TutorBin Petroleum Production Technology homework help when I was struggling with complex concepts. Experts provided step-wise explanations and examples to help me understand concepts clearly.

Rick Jordon

TutorBin experts resolve your doubts without making you wait for long. Their experts are responsive & available 24/7 whenever you need Petroleum Production Technology subject guidance.

Andrea Jacobs

I trust TutorBin for assisting me in completing Petroleum Production Technology assignments with quality and 100% accuracy. Experts are polite, listen to my problems, and have extensive experience in their domain.

Lilian King

I got my Petroleum Production Technology homework done on time. My assignment is proofread and edited by professionals. Got zero plagiarism as experts developed my assignment from scratch. Feel relieved and super excited.

Joey Dip

I found TutorBin Petroleum Production Technology homework help when I was struggling with complex concepts. Experts provided step-wise explanations and examples to help me understand concepts clearly.

Rick Jordon

TutorBin helping students around the globe

TutorBin believes that distance should never be a barrier to learning. Over 500000+ orders and 100000+ happy customers explain TutorBin has become the name that keeps learning fun in the UK, USA, Canada, Australia, Singapore, and UAE.