Question

1. From well log data you have found a potential limestone reservoir of 23 m of gross thickness. The average of RHOB density in the zone is 2300 Kg/m3, the

true resistivity from DLL after environmental corrections is 1.5 ohm-m, water formation resistivity was found from SP measurements to be 0.025 ohm-m. The lecture of the sonic log is almost a constant value of 60 us/ft for the compressional wave, and 90 us/ft for the shear wave. From SCAL in core plugs, it was found that a=1.1, m=1.9, n=2.1. Calculate the following: (20 points) (a) Average (total) porosity in this reservoir (in fraction, two decimals) = (b) Average micro-porosity in this reservoir (in fraction, two decimals) (c) Average Sw (in fraction, two decimals) = (d) Average So (in fraction, two decimals) = (e) Average Bulk Modulus (in GPa, one decimal) = (f) Average Shear Modulus (in GPa, one decimal)= (g) Average Poisson ratio (one decimal)= (h) Is this a hard or soft rock? Why? Compare with what? (i) Average Hydrocarbon Pore Thickness (in m) G) Is this a pay zone if the cutoff of porosity and water saturation are 0.2 and 0.4 respectively?(yes or no)

Question image 1Question image 2Question image 3Question image 4Question image 5Question image 6Question image 7Question image 8Question image 9Question image 10Question image 11