3 10 points assume standard temperature and pressure process exhaust g
3. (10 points) Assume standard temperature and pressure. Process exhaust gas with a volumetricflow rate of 100,000 cfm that contains 5 gr/ft' of cement particulate matter is to be treated withan ESP. Regulatory requirements dictate that the outlet particulate matter concentration mustbe s0.02 gr/ft'. Assume a plate to plate spacing of 10 inches and an applied voltage of 15,000volts. The smallest particles in the gas stream are 2um in diameter, and all particles have adielectric constant of 5.5. Estimate . The particle drift velocity The required collection plate area to meet regulations Assume that plates with length and height of 30 feet are used. Estimate the number of plates required.
*The amount will be in form of wallet points that you can redeem to pay upto 10% of the price for any assignment. **Use of solution provided by us for unfair practice like cheating will result in action from our end which may include permanent termination of the defaulter’s account.Disclaimer:The website contains certain images which are not owned by the company/ website. Such images are used for indicative purposes only and is a third-party content. All credits go to its rightful owner including its copyright owner. It is also clarified that the use of any photograph on the website including the use of any photograph of any educational institute/ university is not intended to suggest any association, relationship, or sponsorship whatsoever between the company and the said educational institute/ university. Any such use is for representative purposes only and all intellectual property rights belong to the respective owners.