6 now build and simulate circuit 1 in multisim live and use a current
6. Now build and simulate circuit 1 in Multisim Live, and use a current probe to measure current Ix due to 48 V alone. Only the 48 V voltage source should be turned on, set the current source to 0 Amps. a. Beside your circuit, indicate the circuit number, also your first & last name using a text annotation (found in the area with the voltage/current probes). b. Now make a copy of the circuit (as shown in the video) putting it below. Change the copied circuit so that you are finding Ix with the 16 mA current source alone.Set the voltage source to 0 Volts. c. Run DC Operating point analysis, do the two results match what was found in your analysis of circuit 1 earlier? Why or why not? (Hint: if not, you have an error in your analysis) d. Obtain a screen capture of your 2 circuits with the results for each contribution to lx clearly shown. FOR SUBMITTED LAB REPORT, PLACE THIS AT THE END.
*The amount will be in form of wallet points that you can redeem to pay upto 10% of the price for any assignment. **Use of solution provided by us for unfair practice like cheating will result in action from our end which may include permanent termination of the defaulter’s account.Disclaimer:The website contains certain images which are not owned by the company/ website. Such images are used for indicative purposes only and is a third-party content. All credits go to its rightful owner including its copyright owner. It is also clarified that the use of any photograph on the website including the use of any photograph of any educational institute/ university is not intended to suggest any association, relationship, or sponsorship whatsoever between the company and the said educational institute/ university. Any such use is for representative purposes only and all intellectual property rights belong to the respective owners.