A double acting cylinder has a bore of 92 mm. The rod diameter is 35 mm. It must produce a pushing force of 18.8 KN. The flow rate available in

both directions is 0.01 m3/min. Note: Number are randomly generated. it is possible to get some huge dimensions. Do not write the units, provide the answers in the requested units. Calculate the system pressure needed. Express your result In Pa. (Round the answer, no decimal is required Example 123.2 becomes 123, 123.6becomes 124) The force with which it pulls, given the same pressure. Express your result In N. (Round the answer, no decimal is required Example 123.2becomes 123, 123.6 becomes 124) The speed on the outstroke. Express your result Inm/s. (Round the answer to 4 decimal Example1.21212 becomes 1.2121) The speed on the instroke. Express your result Inm/s. (Round the answer to 4 decimal Example1.21212 becomes 1.2121) The power used on the outstroke. Express your result In watts. (Round the answer, no decimal is required Example 123.2 becomes 123, 123.6 becomes 124) The stroke of the actuator S knowing that it takes1.82 s for the piston to travel back and forth. (Round the answer to 4 decimal Example 1.21212becomes 1.2121)