problem 2 consider the buck boost regulator in figure 2 take vs 12v an
Problem 2: Consider the Buck-Boost regulator in Figure 2. Take Vs=12V & Is= 0.5A. Take L=200µH, C= 250µF. Compute a) The average output voltage Va, b) The average output current la, c) Peak to eak output voltage ripple, AVC, d) Peak-to-peak ripple current of inductor, Al, Peak current of the transistor, Ip. The Consider the following scenarios: 1. K=0.5, The switching frequency is swept from 10KHz to 100KHz with increments of 5Khz 2. K is swept from k=0.1 to 0.9 with 0.05 increments, switching frequency is fixed at 25 KHz.Show the results in tabular form and graph.
*The amount will be in form of wallet points that you can redeem to pay upto 10% of the price for any assignment. **Use of solution provided by us for unfair practice like cheating will result in action from our end which may include permanent termination of the defaulter’s account.Disclaimer:The website contains certain images which are not owned by the company/ website. Such images are used for indicative purposes only and is a third-party content. All credits go to its rightful owner including its copyright owner. It is also clarified that the use of any photograph on the website including the use of any photograph of any educational institute/ university is not intended to suggest any association, relationship, or sponsorship whatsoever between the company and the said educational institute/ university. Any such use is for representative purposes only and all intellectual property rights belong to the respective owners.