the trailer hitch shown in figure and figure 1 1 p11 has loads applied
The trailer hitch shown in Figure and Figure 1-1 (p.11) has loads applied as shown. The tongue weight of 100 kg acts downward and the pull force of 4905N acts horizontally. Using the dimensions of the ball bracket shown in Figure-5 (p. 14) and Sv = 300 MPa ductile steel, determine static safety factors for (a) The shank of the ball where it joins the ball bracket. (b) Bearing failure in the ball bracket hole. (c) Tearout failure in the ball bracket. (d) Tensile failure in the attachment bolts if they are 19-nnn dia. (e) Bending failure in the ball bracket as a cantilever.
*The amount will be in form of wallet points that you can redeem to pay upto 10% of the price for any assignment. **Use of solution provided by us for unfair practice like cheating will result in action from our end which may include permanent termination of the defaulter’s account.Disclaimer:The website contains certain images which are not owned by the company/ website. Such images are used for indicative purposes only and is a third-party content. All credits go to its rightful owner including its copyright owner. It is also clarified that the use of any photograph on the website including the use of any photograph of any educational institute/ university is not intended to suggest any association, relationship, or sponsorship whatsoever between the company and the said educational institute/ university. Any such use is for representative purposes only and all intellectual property rights belong to the respective owners.