2. An airline orders an aircraft with the following

Question
2. An airline orders an aircraft with the following specifications: mass 50,000 kg, cruise altitude 33,000 ft, cruise Mach number 0.78, lift coefficient at cruise 0.7, maximum possible flight altitude

of 40,000 ft with C in cruise configuration and at cruise Mach number. Take-off speed at sea level shall be 150 kts. In case of a complete engine failure, the gliding range from cruise altitude (maintaining the cruise lift coefficient) shall be 100 nautical miles(assume the gliding path is a straight line, i.e. tan 0=h/R). For the preliminary design, a zero-lift drag coefficient of 0.02 and an Oswald efficiency factor of 0.9 are assumed. a. Calculate the required wing plan form area in cruise condition to provide the necessary lift.All altitude dependent temperatures, pressures and densities must be calculated, not looked up. But feel free to check your results against the atmospheric tables! (12 points) b. Calculate the required aspect ratio. (6 points) c. The wing shall have a straight trailing edge and a swept-back leading edge. The taper ratio is 0.5. Calculate the sweep angle of the quarter-chord line. (12 points) d. What is the required flap capability for the take-off? Identify two types of flap systems that can provide this capability. (Flap systems are designed to increase lift beyond C if needed). Assume that the weight at take-off is the same as in cruise. All altitude dependent temperatures, pressures and densities must be calculated, not looked up. But feel free to check your results against the atmospheric tables! (24 points)

Question image 1Question image 2Question image 3Question image 4Question image 5Question image 6