3:16 5G 04 Section Views 704 6. Grade Beam Draw the Grade Beam foundation detail in Figure 26-40. Do not include the dimensions in your drawing. Use the Hatch command to hatch the concrete slab with AR-CONC hatch pattern. Use Sketch to draw the grade line and Hatch with the EARTH hatch pattern. Save the drawing as GRADBEAM. FIGURE 26-40 4 1-3" 45 87 7. Tool Palettes, Solid Fill A. Open the OFFICE-REV drawing that you last worked on in Chapter 21. Next, open the Tool Palettes. B. Make a new Layer and name it CARPET. Accept the default color, linetype, etc. Make CARPET the Current layer. C. Draw a Line across the doorway threshold of one of the two offices. Next, drag-and-drop a Solid pattern from the standard Hatches and Fills palette into the office. If problems occur, check to ensure that there are no gaps in the office walls. AA > 704 platform.virdocs.com REUSE AA = 3:16 705 Chapter 26 D. When the solid pattern appears in the office, notice that the pattern may cover the outlines of the walls and furniture items. Use the Draworder command to move the new hatch pattern to the Back. Your drawing should look similar to that in Figure 26-41. FIGURE 26-41 5G 04 == Q TT : Electri Mecha... Imperial Hatches Solid ISO Hatches E. Using the same technique, fill the other two office spaces with carpet from the tool palette or use another wood floor pattern such as HOUND. (Depending on the selected pattern, you may have to select Properties from the shortcut menu and change the Scale.) F. Use SaveAs to save and rename the drawing to OFFICE-REV-2. 8. Solid Fill, Fill Command A. Open the OFFICE-REV-2 drawing if not already open. Make a new Layer and assign the name WALLS. Accept the default color, linetype, etc. Make the WALLS layer Current. B. Use the Hatch and Gradient dialog box to apply the Solid hatch pattern to the walls of the office. C. Use the Fill command and turn Off the solid fill. Use the Regen command to apply the new Fill setting. Does Fill affect only the walls, or does it affect the other carpet solid fill patterns? D. Turn Fill On and Regen. Save the drawing. > 705 platform.virdocs.com Tool Palettes-All Palettes