ECE 3211 Construction Engineering Lab LTU Final Project Project description: Administrative building You will create building elements based on the topics covered during this course. You will use Autodesk Revit for the generation of design, and for the simulation of construction process use Navisworks. Due Date: See Project Due Date on Canvas Spaces: • • Two typical floors as shown in Figures 1 and 2 below (first and second floors) The model must contain all the adequate building objects, at a minimum project must have Building Pad, ○ Masonry walls, Concrete floor, columns, roof, and stair, and ○ Windows and doors. Simulation: Construction Schedule Task ID Туре Title Duration Expected Start Expected End 31000 Construct Excavation 3 9/1/2022 9/4/2022 31100 Construct Building pad 4 9/5/2022 9/9/2022 First floor 31200 Construct columns and 9/10/2022 9/15/2022 stair First floor 31300 Construct Walls, 9/16/2022 9/17/2022 windows, doors First floor Slab 32100 Construct 2 9/18/2022 9/20/2022 and beams Second floor 32200 Construct columns and 5 9/21/2022 9/26/2022 stair Second floor 32300 Construct Walls, windows, doors 9/27/2022 9/28/2022 Second floor 32400 Construct Slab and beams 2 (roof) 9/29/2022 10/1/2022 Page 1 of 4 ECE 3211 Construction Engineering Lab Submission requirements: • (20 pts) Revit Model (must be .rvt extension) • (20 pts) Quantity take-off schedules (must be in Excel format) including: ○ Masonry walls, Concrete floors, concrete roof, and concrete stair, and Windows and doors. (20 pts) Sheets with title block (must be in PDF format) including: O First floor plan ○ Second floor plan One section One elevation • (20 pts) Construction simulation including: • • О Video showing construction schedule O Navisworks Model (must be .nwd extension) (20 pts) Life Cycle Assessment using Tally O PDF report for one type of the model structural elements (e.g., columns, beams, or floor slab, etc.) Detailed list of all assumptions made (e.g., wall and column dimensions, floor height, etc.) Page 2 of 4 ECE 3211 Construction Engineering Lab Building Information Modeling STAIRS HDWD. Office 12' x 11' Reception 24' 6" x 16' 0" Figure 1. First Floor Office 12' x 11' Page 3 of 4 ECE 3211 Construction Engineering Lab Building Information Modeling PSTAIRS HOWD Office 12' x 11' Reception 24' 6" x 16' 0" Office 12' x 11' Figure 2. Second Floor Page 4 of 4