Introduction Assignment Instructions 1.1. Provide a carefully description of the risk factors for physical ergonomics, organizational ergonomics, cognitive ergonomics, others (heat, noise, biologicals, etc.) associated with the laundry process. 1.2. Describe the potential health effects for the back, neck, shoulders, arm, forearm, wrist, legs, etc. Provide a rationale for why these body parts are particularly vulnerable. 2. Analysis 2.1. Estimate the layout dimensions of the work area. Describe your assumptions. 2.2. Define the anthropometric measurements that would be required to assess the appropriateness of the current dimensions. Explain why these measurements are necessary and how they will be used in your analysis. 3. Exposure Assessment 3.1. Describe the workflow of the process. Use the diagram provided to illustrate the process. 3.2. Provide a detailed description of the main ergonomic-related issues identified in the process that could affect task productivity. 4. Work Area Redesign 4.1. Describe the recommendation you would implement to reduce the risk of developing musculoskeletal disorders in this work area. You must include suggestions for reducing exposure to the observed risk factors identified in the introduction section. 4.2. Propose a new workflow. Illustrate the new workflow in the diagram. Consider ergonomic principles such as proper lifting techniques, workstation design, and workflow optimization. Written report Analyze the Hotel Laundry process and present a proposal to redesign it. Using the prompts below, write a report that summarizes your assessments, findings, analysis, and conclusions. Illustrate your analysis with drawings. Present your report using the numbering provided above. Oral Presentation Power Point: Duration: 7 minutes Content: Brief overview of the current ergonomic issues based on your key findings classifying the issues by physical, organizational, and cognitive ergonomics. Summary of your redesign proposal explain pre- and post- as well the expected impact of the suggested change. NOTE: REPORT SHOULD BE OF 7 PAGES AND PPT SHOULD BE OF 7 MIN i.e(8-10 slides excluding title page and reference page) include speaker notes as well APA CITATION

Solved: Introduction Assignment Instructions 1.1. Provide a carefully descrip

Home
questions and answers
introduction assignment instructions 1 1 provide a carefully descripti

Question

Introduction Assignment Instructions 1.1. Provide a carefully description of the risk factors for physical ergonomics, organizational ergonomics, cognitive ergonomics, others (heat, noise, biologicals, etc.) associated with the laundry process. 1.2. Describe the potential health effects for the back, neck, shoulders,

Found 5 similar results for your question:

Which Company has the higher injury incidence rate (using OSHA's formula)? Company A. Has 100 employees who worked 80,000 hours in 2020 and had 5 injuries Company B. Has 50 employees who worked 60,000 hours in 2020 and had 4 injuries

3. PROJECT The project will be a very important part of the course. Sample topics include human factors and applications in healthcare, patient safety and telemedicine, transportation, computer, robotics, mechatronics, manufacturing, and service industries. The project will start with literature dealing with a specific aspect of human factors problems. The project report must include the following sections: 1. Introduction and Motivation 2. Literature review 3. Research methods 4. Data Analysis and Results 5. Discussions and Conclusions 6. References Project phases: During the semester, you need to present and submit the report for three phases: Phase 1 project proposal, Phase II project progress, and Phase III final project. Phase I project proposal: you are required to define the research question/issue, supported by reviewing recent literatures. You should finish the Introduction and Motivation. Literature Review, and your plan of Research Methods, Each team is required to submit a project proposal (2 pages). Phase II project progress: you are required to finish the third section Research Methods which consists of the 3.1 Participants, 3.2 Experiment Design, 3.3 Measurements, and 3.4 Procedures. The Pilot Testing as the first part of Results also should be completed. In Phase II you will need to present and submit the project progress report (6 pages). Phase III final project: you are required to finish recruiting all subjects and finish all sections. You can separate the Conclusion and Discussion into two sections. It depends on the extent of your project. If your discussion has at least one column to one page, you should separate them into two sections. If it is only half of the column, they shouldn't be separated. The conclusion usually uses non-technical words to summarize your project into 3-5 sentences in one paragraph. The discussion usually discusses the pros and cons, limitations, future works of the project. In Phase III you are required to give a final project presentation and complete the project final report (10 pages). Project Presentation Format and Submission: 1) A 12 min oral presentation should be presented by students for project proposal, project progress, and final project. 2) Your team is required to record and upload the presentation slides and video (in .mp4) on the Discussion Board by the due time. Zoom recording function is suggested to create the video. 3) The Discussions Board section on Canvas is the interaction area we will use. Under each subject entitled "Project Proposal/Project Progress/Final Project Discussion", upload your video by creating a new reply to the subject. 4) You will also comment on other teams' videos in Discussions Board. Each student will need to comment on all other teams' videos in the following 3 days. You may lose points if you do not review and comment on other teams' work. 5) For the final project presentation, each student will evaluate other students' presentation based on an Evaluation Rubrics. Project report You are expected to use the project report template for all report submissions from Phase I- III. The report is cumulative, which you can continue writing on the report of the previous phase. A final report of your project should outline the work done or planned on the project. It should be presented in the form of an IEEE research paper. You are the author of the project, and thus you should include your own interpretation, opinion and recommendations, etc. It is allowed to include figures or quotations from other sources provided that they are properly referenced. Project Report format: Please use the Project Report template for both project proposal and project report. Individual or group projects: For students enrolled in the on-ground section, the course will culminate in a group project, with each team consisting of no more than three members For students enrolled in the online section, you have the flexibility to choose your own individual projects, or form as groups (not more than three members) in the online setting. The course platform will facilitate opportunities to connect with classmates virtually, making it easier to find teammates. Whether you're working individually or in a team, the project aims to synthesize the skills and knowledge acquired throughout the course, offering a substantive evaluation of your grasp on the subje matter.

Q1: Read the following article: Campion, M. A., Mumford, T. V., Morgeson, F. P., & Nahrgang, J. D. (2005). Work redesign: Eight obstacles and opportunities. Human Resource Management, 44(4), 367-390. DOI: 10.1002/hrm.20080 Summarize the obstacles to work redesign and the authors' suggestions for managing these obstacles in practice.

Purpose of this assignment Design safe work tasks and methods (Synthesis) Task 1 With an increase in office workers sitting in computer workstations for the duration of an 8-hour day, it is necessary that conditions are ergonomically correct so as to avoid carpal tunnel syndrome, eye strain, etc. Every day youare forced to sit at a computer to complete assignments for your class and now it is time to see if your work environment needs changes. 1. How can you make the office equipment that we use every day more ergonomic? 2. For the health risks associated with MSI's (Musculoskeletal Injuries), describe: a. How a person can get this injury. b. What exactly is happening in the body with this injury? c. What can a person do to prevent getting this injury? Task 2 1. Explain how to minimize overloading of the visual system in a visual inspection task in a manufacturing facility with an example from a company of your choice. 2. Discuss the types of vibrations impacting workers and the sources of vibration How can these levels of vibration be determined? Evidence checklist Assessment Criteria Task 1 Written paragraph with 200 words and with references Task 2 Written paragraph with 200 words and with references Is Evidence provided? Y/N Y/N

Assignment: You should select an aviation incident from a recommended list that allows you to demonstrate your ability to analyse from a human factors perspective. You should not pick a case which is not on the recommended list as it is possible that it will not have enough depth of Human Factors related content. The submission should be no longer than 2,500 words at most and should be referenced consistently. Referencing can be by any accepted standard such as IEEE or Harvard, as long as it is clear and consistent. You should focus on the case that you chose, but it is acceptable to refer briefly to other incidents if it helps to demonstrate a principal or highlights a common issue in flight safety. The case study must be arranged in a clear, well structured report with a title, abstract, introduction, analysis, conclusion and references. These are not hard and fast section headings as your case may lend itself to another structure, but it must be logically structured. The report should be produced in Word, Tex, LaTeX or using another appropriate tool.