a design the circuit such that ipo1 0 1 ma ipq2 0 2 ma vsdq1 1 v andvd
Problem 7: Consider the circuit shown in Figure 7. The transistor parameters are VTp1-0.4 V, VTn2 = 0.4 V, (W/L)1 = 20, (W/L)2 = 80, k, = 100µA/v², and k, = 40µA/V², and2, = 12 = 0, Let Rin = 200 k Q.(16 points) (a) Design the circuit such that Ipo1 = 0. 1 mA, IpQ2 = 0. 2 mA, VSDQ1 = 1 V, andVDsQ22 V. The voltage across Rs1 is to be 0.6V. (4 points) (b) Determine the small signal voltage gain (4 points) (c) Find the small signal output resistance Ro (4 points) (d) Implement your circuit using NI Multi-sim and CD4007 transistor model. Comment on any differences between voltage gain obtained from part (b) and your simulation results
*The amount will be in form of wallet points that you can redeem to pay upto 10% of the price for any assignment. **Use of solution provided by us for unfair practice like cheating will result in action from our end which may include permanent termination of the defaulter’s account.Disclaimer:The website contains certain images which are not owned by the company/ website. Such images are used for indicative purposes only and is a third-party content. All credits go to its rightful owner including its copyright owner. It is also clarified that the use of any photograph on the website including the use of any photograph of any educational institute/ university is not intended to suggest any association, relationship, or sponsorship whatsoever between the company and the said educational institute/ university. Any such use is for representative purposes only and all intellectual property rights belong to the respective owners.