Stundent has an ANSYS file that is already drawn and ready Student is facing issue in BASE, his issue is that: The stresses are not shown clearly in below image

there is not enough stress A: Static Structural Equivalent Stress Type: Equivalent (von-Mises) Stress Unit: MPa Time: 1 s 11/12/2023 09:01p 178.97 Max 159.08 139.2 119.31 99.428 79.542 59.657 39.771 19.886 9.948e-12 Min Figure 1: Fig: 1 0.00 125.00 Need to do it in ANSYS 2022 375.00 500.00 (m Student is making a mechanical hoisting device The base compared to the extended arm doesn't show stress Which is an error that needs to be fixed so here we basically need to EDIT the given ANSYS file student just stresses on base only for both the below 2 options 1) carry up to 600 kgs with a safety factor of 1.6 2) For 450 kgs weight it's safety factor is 2 All the relevant and required files are added Ansys 2022 R2 The below image is motorized pulley and it is supposed to be Connected to a truck hitch receiver scar 8 0.00 750.00 Fig 2: It's motorized pulley motor Max 1500.00 Pulley 2250.00 3000.00