figure 1 shows a common and simple power circuit breaker control schem
Figure 1 shows a common and simple power circuit breaker control schematic. You are asked to draw an equivalent logic diagram using the well-known symbols shown in Figure 3. In order to complete the scheme, use a simulated representation of the actual circuit breaker as shown in Figure 2. Assume that both, the tripping coil and the closing coil have associated contacts and that they operate over an auxiliary relay (used to simulate the circuit breaker) called 52, which has normally open (52/a) and normally closed (52/b) contacts. CS/T and CS/C are spring self-reset switches as explained in class. a) Explain the scheme shown in Figure 1. Put special emphasis on the function of auxiliary relay Y. b) Draw the logic diagram using logic gates symbols as explained in class
*The amount will be in form of wallet points that you can redeem to pay upto 10% of the price for any assignment. **Use of solution provided by us for unfair practice like cheating will result in action from our end which may include permanent termination of the defaulter’s account.Disclaimer:The website contains certain images which are not owned by the company/ website. Such images are used for indicative purposes only and is a third-party content. All credits go to its rightful owner including its copyright owner. It is also clarified that the use of any photograph on the website including the use of any photograph of any educational institute/ university is not intended to suggest any association, relationship, or sponsorship whatsoever between the company and the said educational institute/ university. Any such use is for representative purposes only and all intellectual property rights belong to the respective owners.